table and chairs in a garden that has been cleaned using Jeyes Fluid products for Spring

November 27, 2025

Cleaning Your Garden in Spring (Ultimate Guide)

by Farah ElZoheiry in Blog

After a long winter, your garden deserves a fresh start. Spring is the perfect time to clear away the effects of cold, wet weather and prepare your outdoor spaces for the months ahead.

From moss-covered patios and weather-worn furniture to drains and decking that have seen better days, a thorough spring garden cleaning routine brings everything back to life - restoring brightness, hygiene and pride to your home exterior.

At Jeyes Fluid, we’ve been helping households across Britain clean and protect their outdoor spaces since 1877.

With over 145 years of expertise, our outdoor cleaning products are trusted to remove stubborn dirt, tackle bacteria and refresh every corner of the garden - safely and effectively.

In this guide, we’ll take you through everything you need to know to clean your garden this spring, from the essential tasks and tools to step-by-step methods for patios, decking, furniture and more.

Why Spring is the Best Time to Clean Your Garden

After months of cold, wet and often harsh weather, winter can leave your outdoor spaces looking dull and neglected.

Dirt, moss, algae and general debris tend to build up on patios, decking, furniture and garden paths - not only affecting their appearance but also creating slippery or unhygienic surfaces. Spring is the ideal season to put things right and start afresh.

Warmer, drier days make it easier for surfaces to dry after cleaning, while plants and lawns are just beginning to grow again - meaning your garden will quickly return to its vibrant best once cleared and refreshed.

A spring garden cleaning routine sets the stage for a summer of outdoor living, giving you clean, safe and welcoming spaces to enjoy. Regular cleaning also helps to protect your outdoor surfaces for the long term.

Removing algae and grime from paving slabs or decking prevents permanent staining, while clearing drains and bins stops unpleasant odours before they develop.

Our trusted range of products ensures that your garden is not only spotless but also hygienically clean - ready for every barbecue, garden party, or quiet evening outdoors that the season brings.

To learn more about our heritage and long-standing commitment to outdoor hygiene, visit our About Us page.

Essential Spring Garden Cleaning Checklist

A good spring garden cleaning routine covers every area that’s been affected by winter weather - from paving and decking to drains, bins and furniture.

Working through each space methodically ensures your garden looks fresh, tidy and ready to enjoy as the warmer months arrive.

Here’s your complete checklist for a cleaner, healthier outdoor space this spring:

1. Patios and Paving Slabs

Winter rain and frost can leave paving stained and slippery with algae and grime.
Start by sweeping away loose debris, then clean thoroughly with Jeyes 4-in-1 Patio & Decking Cleaner 2L.

This versatile cleaner removes dirt, disinfects, eliminates algae and revives the natural colour of stone or concrete - restoring your patio’s appearance with minimal effort.

2. Decking and Fencing

Wooden decking and fencing are particularly prone to mildew and green growth during damp months.

Scrub affected areas with a stiff brush and apply a diluted outdoor cleaner like Jeyes Multi-Use Outdoor Cleaner 5L. It cleans effectively while being gentle on treated timber and outdoor coatings.

3. Garden Furniture

Whether it’s plastic, wood, or metal, outdoor furniture benefits from a thorough spring clean.

Wipe down with warm water and a mild solution of Jeyes Ready-to-Use Spray to remove dirt, mould and bacteria. For more extensive cleaning, the Multi-Use Outdoor Cleaner provides a powerful yet safe deep clean.

4. Wheelie Bins and Outdoor Waste Areas

Bins can harbour bacteria and odours after the colder months. Disinfect and deodorise them using Jeyes Freshbin Powder 550g - a fast-acting, fresh-smelling formula that kills germs and neutralises unpleasant smells, keeping your bin area hygienic.

5. Drains, Gullies and Gutters

Blocked drains and gullies can cause standing water or foul odours as temperatures rise.

Use Jeyes Drain Unblocker 1L to break down grease, grime and blockages quickly, restoring proper flow and preventing future issues.

6. Greenhouses, Sheds and Outdoor Storage

Wipe down windows, shelving and surfaces with a diluted Jeyes Outdoor Cleaner solution.

This not only removes dirt and algae but also eliminates bacteria, helping to protect plants, tools and equipment from mould or mildew.

By working through this simple checklist, you’ll transform your garden from winter-worn to spring-ready - clean, fresh and full of life.

For more ways to revitalise outdoor surfaces, explore our Outdoor Cleaners Collection and Drain Unblocker Range.

Step-by-Step: How to Refresh Your Garden After Winter

Once you’ve gathered your cleaning products and tools, it’s time to bring your garden back to life.

This simple, structured process will help you transform dull, weathered outdoor spaces into a bright, welcoming environment ready for spring.

Step 1 – Tidy and Clear Debris

Begin by removing any leaves, twigs and other debris that have collected over winter. Sweep patios, paths and decking with a stiff outdoor broom and clear any fallen branches or garden waste from borders and beds.

This makes cleaning easier and ensures outdoor surfaces are fully exposed before applying any cleaning solution.

Dispose of waste responsibly - composting organic matter where possible to reduce environmental impact.

Step 2 – Clean Patios, Paths and Decking

Patios, paving slabs and decking tend to show the most visible signs of winter wear.

Dilute Jeyes 4-in-1 Patio & Decking Cleaner 4L according to label instructions and apply evenly using a watering can or sprayer.

Allow the solution to work for several minutes to loosen dirt and algae, then scrub with a stiff brush.

For heavier build-up or stubborn staining, repeat the process or use Jeyes Driveway & Masonry Cleaner 5L for tougher stone and concrete surfaces. Rinse thoroughly with a garden hose to reveal a clean, refreshed finish.

Step 3 – Wash and Disinfect Outdoor Furniture

Garden furniture can collect mould, dirt and bacteria during the colder months. Clean with Jeyes Multi-Use Outdoor Cleaner 5L, a versatile solution that’s suitable for plastic, metal and painted wood.

For quick touch-ups, Jeyes Ready-to-Use Spray offers convenient cleaning for smaller areas or delicate surfaces.

Allow furniture to dry completely before placing cushions or covers back on.

Step 4 – Clean Bins, Sheds and Drains

Tackle odours and hidden bacteria in outdoor bins with Jeyes Freshbin Powder 550g. Sprinkle directly into the base of the bin to absorb moisture and neutralise unpleasant smells.

Check drains and gullies for winter debris. If slow-draining or blocked, pour Jeyes Drain Unblocker 1L into the affected area to break down blockages and restore flow.

Step 5 – Finishing Touches

Once cleaning is complete, give paths and patios a final rinse to remove residue, then sweep away standing water. Clean garden ornaments, wipe shed doors and prepare pots or planters for new spring growth.

Taking the time to refresh every corner of your garden now ensures a clean, welcoming space you can enjoy all season long.

Safety and Environmental Tips for Spring Cleaning

At Jeyes Fluid, safety and environmental responsibility are at the heart of everything we do.

Our products are designed to deliver professional cleaning performance while ensuring safe, responsible use around your home and garden.

Follow these essential tips to get the best results from your spring garden cleaning while protecting yourself and the environment.

1. Always Read and Follow the Label

Before using any outdoor cleaner or disinfectant, take a moment to read the product label carefully.

It includes important guidance on dilution ratios, contact times and safe handling. Following these instructions ensures you achieve effective cleaning without overusing the product.

2. Wear Protective Gear

Outdoor cleaners are formulated for power and performance.
Protect your hands and eyes by wearing gloves and safety glasses, especially when working on large areas or when applying diluted solutions with a sprayer or watering can.

3. Avoid Runoff into Soil or Water

When rinsing patios or driveways, try to prevent run-off from entering flowerbeds, lawns, or ponds.
Rinse toward paved or gravel areas instead, where the solution can safely disperse. This helps protect plants and wildlife while maintaining cleaning effectiveness.

4. Use Correct Dilution and Contact Times

Using more product than necessary won’t improve cleaning results - in fact, it can make rinsing more difficult.

Follow the recommended dilution instructions on Jeyes Fluid labels to ensure the perfect balance between cleaning power and safety.

5. Store Safely After Use

Always reseal containers tightly and store products upright, away from direct sunlight and out of reach of children or pets.

Safe storage helps maintain product quality and ensures long-term reliability.

6. Dispose of Waste Responsibly

Never pour leftover cleaner into drains or natural water sources.

Instead, follow disposal advice on the packaging and rinse empty containers thoroughly before recycling where facilities exist.

With careful use, Jeyes Fluid products help you clean effectively and responsibly - delivering professional results while supporting safer, more sustainable outdoor living.

For more product safety information and usage advice, visit our FAQs.

Trust Jeyes Fluid for Your Spring Garden Cleaning

When it comes to keeping outdoor spaces clean, safe and inviting, few names carry the same heritage and trust as Jeyes Fluid.

Since 1877, we’ve been helping UK households care for their gardens, patios and driveways with cleaning products that deliver powerful results you can depend on year after year.

Our reputation has been built on more than a century of outdoor cleaning expertise.

Every Jeyes Fluid product is specially formulated to remove dirt, kill bacteria and tackle even the toughest outdoor grime - all while being safe to use when diluted correctly.

Spring Garden Cleaning Ready!

A thorough spring garden cleaning is the best way to welcome the warmer months and bring new life to your outdoor spaces.

By clearing away winter’s dirt, washing key areas and using trusted cleaning solutions, you’ll not only create a beautiful garden to enjoy but also protect your surfaces for the seasons ahead.

Explore the full Jeyes Fluid Outdoor Cleaning Range to find everything you need for a cleaner, fresher and more welcoming garden this season.

November 19, 2025

How to Clean Paving Slabs (Step-By-Step Guide)

Keeping your paving slabs clean is one of the simplest ways to restore the beauty of your outdoor spaces and protect them from long-term wear. Over time, natural growths like moss and algae can dull the appearance of patios, driveways and garden paths, making them slippery underfoot and unsightly to look at. Knowing how to clean paving slabs properly ensures your surfaces not only look their best, but also remain safe, hygienic and well maintained throughout the year.At Jeyes Fluid, we’ve been helping homeowners care for their outdoor spaces since 1877. With over 145 years of expertise in outdoor hygiene, we understand what it takes to remove stubborn grime and restore paving to a like-new finish. In this step-by-step guide, our cleaning experts share the safest and most effective methods for tackling everyday dirt, seasonal build-up and deep-rooted stains - using trusted Jeyes Fluid outdoor cleaning solutions that deliver powerful results with every application. Why Cleaning Your Paving Slabs Matters Paving slabs are constantly exposed to the elements - from rainfall and frost to fallen leaves, mud and garden debris. Over time, this exposure allows dirt, moss and algae to build up across the surface. Not only does this make your patio or driveway look tired and discoloured, but it can also create a slippery layer that poses a safety risk, particularly during wet or cold weather.Regular cleaning is about much more than just keeping things looking tidy. It helps protect the integrity of your paving, preventing organic matter and grime from settling into the stone or concrete where it can cause staining and deterioration. Left untreated, this build-up can also encourage weeds to take root between slabs, making maintenance harder in the long run.By taking the time to clean your paving slabs properly, you’ll not only improve the appearance of your outdoor space, but also extend the life of your surfaces.Our heritage and expertise make us the brand homeowners continue to trust for powerful, reliable results that stand the test of time. For more on our history and heritage, visit our About Us page. Tools and Materials You’ll Need Before you begin cleaning your paving slabs, it’s worth gathering everything you’ll need to complete the job safely and efficiently. Having the right tools and products on hand will help you achieve a deeper, longer-lasting clean without damaging your surfaces. Essential Equipment Stiff outdoor brush or broom – for loosening dirt, moss and debris. Bucket or watering can – for mixing and applying cleaning solutions. Garden hose – to rinse surfaces thoroughly. Protective gloves and eyewear – to ensure safe handling of cleaning products. Scraper or edging tool – for removing weeds or moss between slabs. Recommended Jeyes Fluid Products To ensure a deep, hygienic clean that eliminates grime, algae and unpleasant odours, we recommend using one of the following trusted outdoor cleaning solutions: Jeyes Fluid Original Outdoor Disinfectant 5L – a powerful, multi-purpose disinfectant ideal for paths, patios and driveways. Jeyes 4-in-1 Patio & Decking Cleaner 2L – formulated to clean, disinfect, remove algae and revive outdoor surfaces with ease. Jeyes Driveway & Masonry Cleaner 5L – designed for tackling tough dirt and oil stains on stone, concrete and brickwork. All of these products are part of our specialist Patio & Decking Cleaners Collection, developed to deliver professional cleaning results for a wide range of outdoor surfaces.With your tools and cleaning solution ready, you’re now prepared to start the process. How to Clean Paving Slabs – Step by Step Cleaning paving slabs properly doesn’t need to be difficult - it just requires the right approach and a trusted cleaner. Follow these steps for safe, effective results that restore your outdoor surfaces to their best condition. Step 1 – Clear and Prepare the Area Begin by removing any furniture, plant pots, or garden accessories from your patio or path. Sweep away loose dirt, leaves and debris using a stiff outdoor brush. Clearing the surface first will make cleaning more effective and prevent dirt from spreading as you wash.If you notice weeds or moss growing between the slabs, use a scraper or edging tool to lift them out before applying your cleaner. This ensures the solution can penetrate deeply into the paving surface for a more thorough clean. Step 2 – Apply Your Chosen Cleaner Next, prepare your cleaning solution according to the product instructions. For general disinfection and algae removal, Jeyes Fluid Original Outdoor Disinfectant 5L can be diluted and applied evenly over the surface using a watering can or garden sprayer.For heavier build-up or stubborn grime, Jeyes 4-in-1 Patio & Decking Cleaner 4L offers powerful four-in-one action - cleaning, disinfecting, removing algae and reviving the natural colour of your slabs.Apply the cleaner generously across the entire area and leave it to work for the time stated on the label. This contact time allows the active ingredients to break down dirt and organic growth for easier removal. Step 3 – Scrub and Rinse Thoroughly Once the solution has had time to act, scrub the paving with a stiff brush or broom to lift away loosened grime and stains. Work in small sections to ensure even cleaning, focusing extra attention on any areas with visible discolouration.Rinse thoroughly using a garden hose to wash away all residue. This is important for preventing streaks and ensuring the surface is safe for use once dry. Avoid rinsing large amounts of cleaning solution into drains or lawns - instead, direct rinse water into gravel or paved areas where possible. Step 4 – Treat Stubborn Stains and Algae For patches of black spot, lichen, or heavy algae growth, a repeat treatment may be needed. Apply a second coat of cleaner to the affected areas, scrub again and rinse well. The Jeyes Driveway & Masonry Cleaner 5L is particularly effective here, cutting through tough deposits and restoring the natural finish of stone and concrete.For ongoing prevention, consider applying your chosen cleaner periodically through the year to stop algae returning and to maintain a fresh, clean appearance. Step 5 – Allow to Dry and Inspect Finally, allow the surface to dry completely before replacing furniture or plant pots. Once dry, check the paving for any missed spots and touch up if necessary. Regular maintenance - a quick sweep or rinse every few weeks - will help keep your paving in excellent condition between deep cleans.With these steps complete, your paving slabs should look clean, refreshed and ready to enjoy once more.Recommended for ongoing care - explore our full range of Outdoor Cleaners for powerful, reliable performance across every surface in your garden. How to Keep Paving Slabs Cleaner for Longer Once your paving slabs are clean and restored, a few simple maintenance habits will help you keep them that way for longer. Regular attention prevents dirt, moss and algae from returning - saving you time and effort in the future while preserving the beauty and safety of your outdoor spaces. 1. Sweep Regularly A quick weekly sweep can make a big difference. Removing fallen leaves, soil and debris stops organic matter from breaking down and feeding algae growth. It also prevents stains from forming, especially in shaded or damp areas. 2. Rinse After Wet Weather After heavy rain or during the wetter months, give your paving a light rinse with a garden hose. This washes away surface dirt before it settles and helps reduce the likelihood of moss or algae forming. 3. Apply a Protective Sealer For lasting protection, consider sealing your paving after cleaning. A quality sealer acts as a barrier against water, grime and frost damage, helping to keep your paving looking newer for longer.We recommend Jeyes Masonry & Driveway Sealer 5L - ideal for protecting stone, concrete and brick surfaces from the elements. 4. Schedule Seasonal Deep Cleans Even with regular upkeep, a deeper clean once or twice a year (typically in spring and autumn) will keep your outdoor areas fresh and hygienic. Using trusted outdoor cleaning solutions from Jeyes Fluid ensures long-lasting results and helps prevent stubborn build-up from taking hold.For additional products designed to protect and maintain your paving, visit our Surface Protection & Grout Cleaning Collection - the professional choice for homeowners who take pride in their outdoor spaces. Common Mistakes to Avoid! Cleaning your paving slabs might seem straightforward, but small missteps can lead to damage or less effective results. Avoiding these common mistakes will help you protect your surfaces and get the most from your outdoor cleaning routine. 1. Using Bleach or Harsh Chemicals Household bleach and acidic cleaners can discolour or weaken paving materials, especially natural stone. They can also harm plants and surrounding soil. Instead, always use purpose-made outdoor cleaning products like Jeyes Fluid Original Outdoor Disinfectant 5L - formulated to clean powerfully yet safely across patios, paths and driveways. 2. Failing to Rinse Thoroughly Leaving cleaner or debris on the surface after scrubbing can lead to streaking or residue once dry. Always rinse thoroughly with clean water to ensure a smooth, even finish and a safe, slip-free surface. 3. Using the Wrong Tools Metal brushes or wire scrapers can scratch and damage paving surfaces, making them more prone to moss and dirt build-up later. Opt for a stiff-bristled outdoor brush instead - strong enough to clean effectively without harming the stone. 4. Skipping Protective Gear Outdoor cleaners are designed for powerful performance, so always wear gloves and avoid contact with eyes and skin. Taking these small precautions keeps the cleaning process safe and straightforward. 5. Ignoring Manufacturer Instructions Each cleaner is formulated differently, so following the dilution ratios and contact times on the label ensures both safety and effectiveness. Jeyes Fluid products are developed to work efficiently when used exactly as directed - giving you professional results with peace of mind.By avoiding these pitfalls, you’ll keep your paving looking its best while protecting your investment for years to come. Why Choose Jeyes Fluid for Outdoor Cleaning? For over 145 years, Jeyes Fluid has been the name homeowners trust to keep their outdoor spaces clean, hygienic and well cared for. Since 1877, our products have helped generations tackle the toughest outdoor cleaning challenges - from mossy patios and algae-covered decking to weathered driveways and dirty paths.Our range is built on a legacy of proven performance and reliability. Each Jeyes Fluid product is formulated to deliver outstanding cleaning power while maintaining the highest standards of safety for your family, pets and garden. You’re Ready to Clean! Learning how to clean paving slabs properly not only restores the appearance of your outdoor spaces but also protects them for the long term. By following the right steps - and using trusted cleaning solutions from Jeyes Fluid - you can achieve safe, professional-grade results that last season after season.Browse the complete Jeyes Fluid Outdoor Cleaning Range to find everything you need to keep your paving - and every other outdoor surface - looking beautifully clean all year round. Frequently Asked Questions Can I use bleach to clean paving slabs? It’s best to avoid bleach. While it might remove surface dirt, bleach can discolour stone and concrete over time, damage nearby plants and harm surrounding soil.Instead, use a dedicated outdoor cleaning solution such as Jeyes Fluid Original Outdoor Disinfectant 5L - formulated to clean effectively, disinfect safely and protect your outdoor surfaces without harsh side effects. Is Jeyes Fluid safe for all types of paving? Yes - when diluted and applied as directed, Jeyes Fluid products are suitable for most paving materials, including concrete, brick and stone. However, for natural or delicate stone, it’s always best to test on a small, inconspicuous area first. Each formula is designed to deliver powerful cleaning performance while maintaining the integrity of the surface. How often should I clean my paving slabs? For best results, aim to give your paving a thorough clean at least twice a year. This keeps algae, moss and dirt under control and prevents long-term discolouration. In between deep cleans, a light sweep or rinse will help maintain a fresh, tidy appearance. Can I pressure wash after using Jeyes Fluid? Absolutely. Once the cleaning solution has been left to work and thoroughly rinsed off, a pressure washer can be used to enhance results and remove any remaining residue. Combining both methods gives your paving slabs a professional-quality finish that lasts.

November 19, 2025

How to Clean a Driveway (Expert Guide)

Your driveway is one of the first things people notice about your home - yet it’s also one of the most exposed. Over time, oil spills, algae, moss and everyday dirt can make even the smartest surface look tired and slippery underfoot. Regular cleaning not only restores its appearance but also protects against long-term wear and damage. With more than 145 years of outdoor cleaning expertise, Jeyes Fluid has been trusted by generations to deliver powerful, reliable results across a plethora of gardens and driveways. In this expert guide, we’ll show you how to clean your driveway safely and effectively, using proven methods and professional-grade outdoor cleaners designed for lasting performance. Why Cleaning Your Driveway is Crucial A clean driveway does more than improve your home’s kerb appeal - it plays a vital role in safety and surface preservation. Dirt, algae and moss can quickly build up, especially in the damp climate we inevitably experience, creating slippery patches that increase the risk of slips and falls. In colder months, trapped moisture can freeze and expand, causing cracks or surface erosion over time. Consistent driveway cleaning helps prevent this gradual damage, extending the life of materials such as concrete, block paving and tarmac. Beyond safety and durability, maintaining a clean driveway also protects your investment. By removing organic growth and contaminants early, you reduce the need for costly repairs or resurfacing later. What You’ll Need Before You Start Before beginning any driveway cleaning process, preparation is key. Having the right tools and cleaning products to hand will make the process smoother. Essential tools and equipment: A stiff outdoor broom or brush for sweeping debris A bucket or watering can for applying cleaning solution A pressure washer (optional, depending on the surface type) A hose with clean water supply for rinsing Protective gloves and suitable footwear for safety Choosing the right cleaner for your driveway Not all driveways are the same - and neither are the cleaning solutions they require. For concrete or block paving, a specialist formula such as the Jeyes Driveway & Masonry Cleaner 5L effectively lifts dirt, grease and algae without harming the surface. For more delicate materials like tarmac or resin-bound driveways, a gentler product such as the Jeyes Multi-Use Outdoor Cleaner 5L is ideal. If you’re unsure which cleaner best suits your surface, use our Product Selector for bespoke recommendations; you can also find helpful application advice on our FAQs page to ensure the best results every time. Safety first: Always wear gloves when handling cleaning solutions and avoid contact with skin or eyes. Ensure good ventilation when working outdoors and take care to prevent run-off into garden borders or drains not intended for chemical products. Jeyes Fluid products are formulated for outdoor use and, when used as directed, provide a powerful yet responsible way to keep your home environment clean and hygienic. How to Clean a Driveway (Step-By-Step) No matter the material, a structured approach delivers the best results. Follow our steps below to restore your driveway’s appearance and maintain its long-term condition. For Concrete and Masonry Driveways Clear the surface: Start by sweeping away loose dirt, leaves and debris using a stiff brush. Pre-rinse: Hose down the area to remove surface dust and prepare it for cleaning. Apply your cleaner: Dilute Jeyes Driveway & Masonry Cleaner 5L according to the on-pack instructions. Pour or spray evenly across the surface, ensuring full coverage. Agitate and leave to work: Use a stiff brush to scrub the area, then allow the solution to sit for around 10–15 minutes to break down ingrained grime and algae. Rinse thoroughly: Rinse away the cleaner with clean water, either with a hose or a pressure washer set to a moderate pressure. For Block Paving Remove moss and weeds: Pull up weeds between the joints and sweep off debris. Apply cleaner: Use Jeyes 4-in-1 Patio & Decking Cleaner 4L diluted as directed. Pour or spray evenly across the blocks. Scrub and rinse: Work the cleaner into the surface with a stiff brush, leave for 5–10 minutes, then rinse well. Re-sand if needed: Once the area is dry, brush kiln-dried sand into the joints to maintain stability and prevent weed regrowth. For Tarmac or Asphalt Driveways Avoid harsh pressure: Tarmac can be softened or damaged by high-pressure washing. Use a garden hose and stiff brush instead. Use the right product: Apply Jeyes Multi-Use Outdoor Cleaner 5L, which cleans effectively without stripping or fading the surface. Work gently: Scrub with a soft or medium-bristled brush, leave for a short contact period and rinse thoroughly. For Resin-Bound Driveways Gentle approach only: Resin-bound surfaces are durable but can be damaged by abrasive scrubbing or strong chemicals. Apply mild solution: Use a diluted mix of Jeyes Original Classic Outdoor Disinfectant 5L to sanitise and remove light organic build-up. Rinse thoroughly: Rinse with a hose or a low-pressure washer. Routine maintenance: Clean quarterly to prevent moss and algae taking hold, particularly in shaded or damp areas. Expert Tip: Always test any cleaning product on a small, inconspicuous area first to ensure compatibility with your surface. Avoid using bleach or unapproved detergents, as they can discolour or weaken materials. Removing Common Driveway Stains Even with regular maintenance, driveways can develop stubborn stains that require targeted cleaning: Oil and Grease Stains Oil and grease are among the most common driveway problems, especially beneath parked vehicles. If left untreated, they can penetrate porous materials like concrete or block paving. How to treat: Blot up any fresh spills using absorbent material such as cat litter or paper towels. Apply Jeyes Driveway & Masonry Cleaner 5L directly to the affected area. Scrub with a stiff brush and allow it to sit for 10–15 minutes to break down the residue. Rinse thoroughly with clean water. For stubborn stains, a second application may be required. This formula is designed to lift oil and petrol residues safely without damaging the surrounding driveway surface. Algae, Moss and Lichen Green and black growths such as algae and lichen thrive in damp, shaded areas - particularly during autumn and winter. Besides looking unsightly, they can make surfaces dangerously slippery. How to treat: Remove any loose moss using a broom or scraper. Apply Jeyes Original Classic Outdoor Disinfectant 5L over the affected area. Allow to soak for around 15 minutes; this kills spores and helps prevent regrowth. Rinse away thoroughly with clean water. Regular treatment helps maintain a hygienic surface while preventing the return of moss and algae, keeping your driveway safer all year round. Rust or Tyre Marks Rust stains often appear where metal garden items or tools have been left outdoors, while tyre marks can form from repeated vehicle movement on warm surfaces. How to treat: Apply a small amount of Jeyes Multi-Use Outdoor Cleaner 5L to the stain. Agitate with a brush and allow contact for several minutes. Rinse thoroughly and repeat if necessary. Persistent tyre marks may require regular light cleaning to prevent reappearance. By addressing stains promptly using the correct product, you’ll maintain both the cleanliness and integrity of your driveway surface - ensuring it looks fresh in every season. Driveway Maintenance Tips Once your driveway is clean, a few simple habits can make all the difference in keeping it that way. Routine maintenance not only saves time and effort later but also helps to protect the structure of your surface against weathering, moss growth and discolouration. 1. Clean seasonally Aim to give your driveway a thorough clean twice a year - ideally in spring and autumn - when temperatures are mild and surfaces dry quickly. This helps prevent dirt and organic matter from becoming embedded. A light refresh using the Jeyes Multi-Use Outdoor Cleaner between deep cleans will also keep surfaces looking their best. 2. Keep drains clear Standing water encourages moss and algae to return. Ensure surrounding drains and gutters remain clear to allow proper water flow, especially after heavy rainfall. 3. Tackle small stains immediately Prompt action prevents stains from setting. Oil spots, tyre marks, or muddy patches can usually be treated quickly with Jeyes Driveway & Masonry Cleaner, preventing the need for intensive cleaning later. 4. Control weeds and moss growth Sweep your driveway regularly to remove loose soil and debris that encourage weeds. A quick application of Jeyes Original Classic Outdoor Disinfectant every few months helps discourage regrowth and keeps surfaces hygienically clean. 5. Consider protective sealing Applying a weatherproof sealer such as the Jeyes Masonry & Driveway Sealer 5L provides a protective barrier against moisture, staining and frost damage - making future cleans faster and more effective. With these simple routines, your driveway will remain clean, safe and well-maintained throughout the year. Explore the full range of professional cleaning solutions in the Outdoor Cleaner Collection to find everything you need for lasting results. Expert Tip: Protect Your Driveway After Cleaning Once your driveway has been thoroughly cleaned, the best way to maintain its condition is through proper protection. Clean, porous surfaces - particularly concrete and block paving - are more susceptible to staining and moss regrowth if left untreated. Sealing the surface after cleaning not only enhances its appearance but also forms a protective barrier against the elements. For long-lasting defence, apply Jeyes Masonry & Driveway Sealer 5L once the surface is completely dry. This professional-grade sealer penetrates deep into the material, helping to: Repel water and resist frost damage Prevent moss, algae and lichen from taking hold Reduce the likelihood of oil and dirt absorption Make future cleans quicker and easier To apply, use a watering can or sprayer to ensure even coverage and allow the surface to dry thoroughly before walking or driving on it. With correct sealing, you can expect cleaner results that last for many months - even through the challenges of the British weather. By combining regular cleaning with effective surface protection, you’ll preserve both the appearance and durability of your driveway, keeping it looking like new for years to come. Our formulations are carefully developed to tackle even the toughest outdoor cleaning challenges while being safe, effective and easy to use. Explore our full Outdoor Cleaning Range to find the perfect solution for your next cleaning task.

November 14, 2025

How to Stop Your Bin From Smelling (Expert Tips)

There’s nothing worse than lifting a bin, only to be met with an overwhelming, unpleasant smell. Whether it’s your kitchen caddy, household waste bin or outdoor wheelie bin, lingering smells are a sign that bacteria are hard at work - and without regular cleaning, they’ll only get worse. Fortunately, with the right cleaning routine and a trusted disinfectant, keeping your bins hygienic and fresh is simpler than you might think. At Jeyes Fluid, we’ve been helping households maintain clean, odour-free outdoor spaces since 1877. Over 145 years of cleaning innovation means we understand exactly what causes bin smells and more importantly, how to stop them effectively. In this guide, our team of experts explain how to stop your bin from smelling, how to clean it properly and which specialist products you should use to keep unpleasant odours from returning. Firstly - Why Does Your Bin Smell? Even the cleanest household bins can begin to smell over time. Odours usually develop when bacteria start breaking down organic waste such as food scraps, liquids and packaging residue. The process releases unpleasant gases and if your bin isn’t cleaned or disinfected regularly, those smells quickly become noticeable - especially in warmer weather. Below is a list of the key reasons for why your bin currently smells: 1. Build-up of Bacteria and Food Waste Bits of food, grease and liquids that escape from bin liners collect at the base and around the lid. These damp areas are ideal breeding grounds for bacteria and mould, which generate the rotten smell often associated with bins. 2. Leaking Liquids and Residue Even well-sealed bags can leak small amounts of liquid waste. As this residue dries, it clings to the bin’s surface, feeding bacteria and creating lasting odours that can linger even after a simple rinse. 3. Warm Weather and Limited Air Circulation Heat accelerates decomposition, intensifying odours. Outdoor wheelie bins placed in direct sunlight often trap smells because the lids seal in humid air, preventing the bin from drying properly. 4. Poor Lid Hygiene Handles, hinges and lids are frequently touched but rarely cleaned. Over time, they collect bacteria from waste and hands alike - another hidden source of smell that many people overlook. How to Stop Bin Smelling - A Step-by-Step Cleaning Routine A consistent cleaning routine not only eliminates existing smells but also prevents new ones from forming. Follow this simple, expert-driven 5-step process to keep both indoor and outdoor bins fresh and hygienic: 1. Empty and Rinse the Bin Thoroughly Start by removing all waste and any leftover liners. Give the bin a thorough rinse with warm water to remove loose debris and residue. If you’re cleaning a large outdoor bin, use a garden hose for ease. Make sure you get into corners, hinges and the underside of the lid - these are often where bacteria hide! 2. Use a Disinfectant Cleaner to Kill Germs After rinsing, it’s essential to disinfect. Using a trusted outdoor disinfectant like our Jeyes Fluid Original Outdoor Disinfectant 5L. It helps eliminate 99.9% of bacteria and viruses that cause unpleasant odours. Make sure to dilute according to the label instructions, scrub the interior and exterior surfaces, then leave the solution to sit for a few minutes before rinsing. 3. Deodorise with a Purpose-Made Bin Freshener Once your bin is clean, keeping it fresh between washes is easy with our Freshbin Powder. All you have to do is sprinkle a small amount into the bottom of your bin or directly onto your liner to absorb moisture and neutralise odours; its deodorising action keeps bins smelling clean and pleasant for days. 4. Rinse, Dry and Leave Lid Open After cleaning, give the bin a final rinse with clean water and allow it to dry completely. Leaving the lid open for an hour or two will help air circulate and prevent moisture build-up, which is crucial to avoiding future smells. 5. Maintain Regular Cleaning Every 1–2 Weeks The most effective way to stop your bin from smelling is through consistency! Clean your kitchen and outdoor bins every one to two weeks, depending on use and weather conditions. Regular use of disinfectant and deodoriser will maintain freshness and hygiene effortlessly. Bonus Tips Once your bin is thoroughly cleaned and disinfected, make sure to use these bonus tips below to help prevent unpleasant smells from returning: 1. Always Use Strong, Well-Fitted Bin Liners A high-quality bin liner creates the first barrier between waste and your bin’s interior. Double-bag food waste or use compostable liners if you handle wet kitchen scraps. Regularly check for tears or leaks, as even small punctures can cause residue to collect and smell. 2. Absorb Moisture Naturally A simple yet effective way to prevent odours is to absorb excess moisture - one of the main culprits behind lingering smells. Place a layer of old newspaper at the bottom of the bin before fitting the liner. These materials help keep the interior dry and reduce bacterial growth. 3. Keep Bins Cool and Shaded Warm weather intensifies bin smells, especially in outdoor wheelie bins. Whenever possible, position bins in a shaded area away from direct sunlight. A cooler environment slows the decomposition of food waste, reducing unpleasant smells. 4. Seal Food Waste Before Disposal Before throwing food scraps or packaging into the bin, wrap them securely in paper or small bags. This simple habit significantly reduces the amount of moisture and bacteria that reach the inside of the bin - particularly helpful for meat, fish and dairy waste. 5. Use a Disinfectant Spray Between Cleans To keep bins fresh between full washes, spray the inside and outside surfaces with a reliable multi-purpose cleaner such as our Jeyes Multi-Use Outdoor Cleaner 5L. This professional-grade formula quickly removes grime, bacteria and residues - perfect for using between your cleans. 6. Don’t Forget the Lid and Handles! Odours often linger on parts of the bin that come into frequent contact with hands. Wiping down lids, handles and hinges during every clean helps prevent cross-contamination and keeps your bin hygienic from top to bottom. Avoid These Mistakes Make sure to avoid these mistakes to ensure your bin remains clean and smelling fresh: 1. Ignoring Liquid Residue at the Bottom A quick rinse might seem enough, but any leftover liquid or residue at the bottom of your bin can quickly turn sour. Always ensure your bin is fully emptied and dried after cleaning - even a small puddle can become a breeding ground for bacteria. 2. Overfilling Bin Bags When bin liners are packed too tightly, they can split or fail to seal properly, letting waste seep out. Overfilled bags also stop the lid from closing completely, trapping heat and accelerating decomposition - the ideal conditions for unpleasant smells. 3. Using Too Much Water Without Disinfectant Rinsing with water alone won’t remove germs or odours effectively. Without a disinfectant, bacteria continue to multiply beneath the surface. Always pair rinsing with a reliable antibacterial cleaner for thorough sanitation. 4. Mixing Cleaning Chemicals Combining different cleaning products - such as bleach and ammonia - can be dangerous and counterproductive. Stick to one trusted, purpose-made disinfectant to ensure safe and effective results. Jeyes Fluid’s range of outdoor cleaning products is formulated to work powerfully and safely without the risks of chemical mixing. By avoiding these simple mistakes, you’ll prevent most common bin odour issues before they start. Why Choose Jeyes Fluid for Bin Cleaning For more than 145 years, households across Britain have trusted us to keep their outdoor spaces clean and hygienic. From tackling garden paths to disinfecting bins, our products have stood the test of time - delivering reliable results generation after generation. Founded in 1877, we have become synonymous with outdoor hygiene. Our expertise means we understand the unique challenges of keeping bins fresh; every Jeyes product is carefully formulated to deliver powerful disinfection, effective odour control and lasting cleanliness you can depend on. Our signature Outdoor Cleaners Collection includes time-tested disinfectants, multipurpose sprays and specialist odour solutions. These products are designed to: Kill 99.9% of bacteria and viruses Neutralise unpleasant smells quickly and effectively Leave a clean, fresh fragrance Be suitable for both indoor and outdoor bins Time to Clean Your Bin! Keeping your bin fresh and odour-free doesn’t need to be difficult - it simply takes the right approach, regular cleaning and products you can rely on. By disinfecting routinely, deodorising effectively and following a few expert habits, you’ll enjoy a cleaner, more hygienic home environment all year round. Explore our full range of outdoor and hygiene solutions at Jeyes Fluid and discover why we remain the outdoor cleaning experts, trusted by generations. Frequently Asked Questions (FAQs) 1. How often should I clean my bin? For best results, clean your bin every one to two weeks. During warmer months or when disposing of food waste frequently, weekly cleaning is ideal to keep smells under control. 2. Can I use bleach to clean my bin? While bleach can disinfect, it’s not always the safest or most effective option - especially for outdoor plastics. Bleach can damage certain bin materials and release harsh fumes. Instead, use a purpose-made outdoor disinfectant, specially formulated to kill germs, neutralise odours and protect surfaces safely. 3. What’s the best product to stop my bin from smelling? For long-lasting freshness, we recommend using Jeyes Fluid Freshbin Powder after every clean. It absorbs moisture, neutralises odours and keeps bins smelling clean for days. Pair it with a disinfectant wash using Jeyes Fluid Original Outdoor Disinfectant for a complete hygiene routine. 4. How do I stop my outdoor wheelie bin from smelling in summer? In hot weather, bacteria thrive and odours intensify. To combat this, wash and disinfect your wheelie bin weekly, keep it shaded and ventilated and sprinkle a deodorising powder or absorbent material inside. Regular use of Jeyes cleaning products ensures freshness even during warm spells. 5. Why does my bin still smell even after cleaning? If your bin still smells after cleaning, residue may be trapped in the lid, hinges, or base. Try scrubbing these hidden areas thoroughly and make sure the bin is completely dry before refitting the liner. Persistent odours usually mean bacteria are still active - disinfecting with a professional-strength cleaner will resolve it. 6. Is Jeyes Fluid safe for all types of bins? Yes - when used as directed, Jeyes Fluid products are suitable for most plastic and metal bins. Always follow dilution instructions on the label and rinse thoroughly after use. For delicate indoor bins, choose lighter solutions or our ready-to-use sprays for convenient, safe cleaning.

Popular Products